Charging cable with connector T2

BALS-Prd.-Nr E-332151X050B
EAN/Piece 4024941926676
Packaging Unit 1   Piece
 to documents downloads

BALS-Prd.-Nr E-332151X050B
EAN 4024941926676
Product category Charging cable with connector T2
Type of current AC 3-phase
Type vehicle side Type 2
Colour vehicle side upper part black
midsection grey aluminium
lower part black
Vehicle side with protective c yes
Type infrastructure side Type 2
Colour infrastructure side upper part black
midsection grey aluminium
lower part black
Infrastructure side with prote no
With Incable Control Box ICCB no
Arangement of phases 3p+N+PE and PP+CP
Charging mode Mode 3
Current 32A
Current control contacts 2A
Rated operating voltage 200/346-240/415V
Rated operating voltage contro 30V
Insulation voltage 500V
Mean time to failure MTTF >10 000 connections without load
Operating temperature range -30°C bis +50°C
Plug VDE certificate no. 40038626
Charging connector VDE certifi 40038624
Proximity circuit 220 Ohm
Rated voltage 450/750V
Temperature resistance chargin -40°C bis +80°C
Description of the charging ca Halogen free, flame-resistant, high mechanical resistance, very good cold flexibility, very good oil and fuel resistance, UV-, ozone resistant and weatherproof
Cross-section current-carrying 5 x 6,0mm2
Cross section signal conductor 1 x 0,50mm2
Insulation conductors EPR (3G) EVI-2 (DIN EN 50620)
Jacket material TPE-U (11Y) EVM-1 (n. DIN EN 50620 acc. to DIN EN 50620)
With temperature sensor no
Cable length 5m
Type of cable Straight
Protection degree plugged in IP44
Protection degree with closure IP44
Cable cross section 5 G 6,0 + 1 x 0,5
Charging capacity (kW) 22kW
Contact surface material Silver plated brass
Material of enclosure strengthened thermo-shape material
Cable colour black
Outer diameter D 15,9 ± 0,20 mm
Minimum bending radius static 4 x D
Minimum bending radius dynamic 7,5 x D
Handling Incorrect use caused by torsional stress together with simultaneous expansion of cable should be avoided
Standards charging cable ISO 4982-2
DIN EN 50363-10-2
DIN EN 50267-2-1
IEC 60228
DIN EN 50620
IEC 60332-1
Type of Product Charging cable eMobile
Article category eMobile contacts crimped
Version ETIM-7
Class EC002897 - Charging cable E-Mobility
Type of current AC 3-phase
Type vehicle side Type 2
Type infrastructure side Type 2
With Incable Control Box (ICCB) FALSE
Charging mode Mode 3
Nominal current 32
With temperature sensor FALSE
Cable length 5
Type of cable Straight
  • Further technical article descriptions on request.
    with connector Type 2