| BALS-Prd.-Nr |
E-322151-050 |
| EAN |
4024941776882 |
| IP-Protection |
IP44 |
| Product category |
Charging cable with connector T1 |
| information of protection |
IP44 |
| Type of current |
AC 1-phase |
| Type vehicle side |
Charging connector type 1 |
| Colour vehicle side |
top cover black
center cover grey aluminium
buttom cover black |
| Vehicle side with protective c |
TRUE |
| Type infrastructure side |
Free cable end |
| With Incable Control Box ICCB |
FALSE |
| Arangement of phases |
2p+PE and CS+CP |
| Charging mode |
Mode 3 |
| Current |
20A |
| Current control contacts |
2A |
| Rated operating voltage |
200-250VAC |
| Rated operating voltage contro |
30V |
| Insulation voltage |
500V |
| Mean time to failure MTTF |
>10.000 plug-in cycles without load |
| Operating temperature range |
-30°C - +50°C |
| Charging connector VDE certifi |
40040174 |
| Proximity circuit |
480 ohm (lever operated) / 150 ohm (lever not operated) |
| Locking |
Eyelet Ø 5mm for padlock, which enables locking during charging |
| Rated voltage |
450/750V |
| Temperature resistance chargin |
-40°C to +80°C |
| Description of the charging ca |
Halogen free, flame resistant, high mechanical resistance, very good cold flexibility, very good oil and fuel resistance, UV-, ozone resistant and weatherproof |
| Cross-section current-carrying |
3 x 2,5mm2 |
| Cross section signal conductor |
1 x 0,50mm² |
| Insulation conductors |
EPR (3G) EVI-2 (DIN EN 50620) |
| Jacket material |
TPE-U (11Y) |
| With temperature sensor |
FALSE |
| Cord length |
5m |
| Type of cable |
straight |
| Specification/Norm |
IEC 61851-1 |
| Cable cross section |
3 G 2,5 + 1 x 0,5 |
| Charging capacity (kW) |
3.7kW |
| Contact surface material |
Ag |
| Material of enclosure |
Strong thermo moulded material |
| Cable colour |
black |
| Outer diameter D |
10,0 ± 0,30 mm |
| Minimum bending radius static |
4 x D |
| Minimum bending radius dynamic |
7,5 x D |
| Handling charging cable |
Torsion with simultaneous stretching of the cable is considered improper. |
| Standards charging cable |
ISO 4982-2
DIN EN 50363-10-2
DIN EN 50267-2-1
IEC 60228
DIN EN 50620
IEC 60332-1 |
| Description |
The charging cable with vehicle connector Type 1 can be used for applications in mode 2 and mode 3 connection C according to IEC 61851-1. |
| Type of Product |
Charging cable fixed |
| Article category |
eMobile contacts crimped |
|
